Finger Fidget Spinner
The build consists of 4 separate parts. It is printable in both PLA and PETG.
In the contest Finger toys
51
220
0
1291
updated January 1, 2024
Description
PDFPrint everything except for the main body parts with 15% infill. Print the main body parts at 100% infill.
Print everything at 0,2mm layer height.
The assembly is simple. Just put the gears together and secure them in place with the main body parts.
You will only have to print one middle gear.
Tags
Model origin
The author marked this model as their own original creation.
