Dummy13 Goes to the Moon - Astronaut Remix (Single Color Version with a card option)

Please keep all these small parts away from children and pets, some parts have pointy ends, and they could be a choking hazard too.  Make or use these at your own risk.

Dummy13 may not have the right stuff to go to the moon, but that's OK, it's a robot (I think).  With this astronaut remix, Dummy13 will be ready to be strapped to a rocket for a trip to the moon and beyond.  For some reason I included a backpack and a helmet, but don't over think it (I didn't).  Maybe the pack is for extra batteries or something?  In any case Dummy13 will look just like a real astronaut, while performing those dangerous one way missions to places humans dare not go.

This is a single color printer friendly remix, of my Dummy 13 Astronaut suit. It's also of course, a remix of Lucky13 Toys' awesome Dummy 13 model.  All the parts are now available on a card, which includes all the armor parts (so just grab the frame parts from the Dummy 13 model to have everything needed).  There is also a multicolor plate in the 3mf which prints by object (so just a few color swaps).

Compared to my original MMU version of the Astronaut suit, this version has an improved helmet, with a separate visor (and optional stripe), which can be printed in different colors and assembled.   

There is now an Astronaut Tools Kit available, with some tools, which you can find here.

Big thanks to Soozafone for the awesome Dummy13 model, which this is remixed from!  If this remix is not for you, the Dummy 13 model, and it's other remixes are definitely worth a look (and a like).

If you want to add a cool “Photon Cannon” for your Astronaut, check out ntdesign's DUMMY 13 Lamp (250% scale).

Mici has made a Moon Rover for Dummy 13, which I'm currently building to give my astronauts a cool ride across the lunar surface.   You can check it out here or on MakerWorld:

https://www.printables.com/model/1021319-nasa-artemis-lunar-terrain-vehicle-moon-buggy-v1b1

https://makerworld.com/en/models/770027#profileId-705787

Printing and other stuff:

The parts here are designed for regular single color printers.  Supports are required on the helmet and the visor, but the other parts can print without supports.  It is best to use an adaptive (smooth) layer height on the helmet and visor,  with a 0.2mm base height.  Using adaptive layers is optional, but will make it look nicer.

This model will require all of the frame parts, and most of the armor parts from the original Dummy13 model. 

Thanks to a tip by MK4_Expert, I re-printed my frame parts in PETG after the PLA frame joints became loose, and the PETG seems to be much better at keeping it's position - so I'd recommend printing the frame parts in PETG if possible.

Some superglue will be needed to glue the visor to the helmet, and a dab may also help on the helmet stipe insert and backpack (if you want that to be permanent).

Other Stuff:

If you like this design and want to check out some of my other Dummy 13 stuff, here is a list of my Dummy 13 Weapons and Adventure Packs:

Weapons Pack V1.0 - Shotgun, Handguns, Holsters and Katanas (superseded by the v2.1 pack)

Weapons Pack V2.1 - MP5SD, MP5K's, Pump Action Shotgun, Handguns, Holsters and Katanas

Sci-Fi Weapons Pack V3.2 - Halo/Sci-Fi Inspired Rifle, Handgun, Shotgun and Machetes

Sci-Fi Weapons Pack V4.0 - Star Wars/Sci-Fi Inspired Rifles and Pistols

Alpine Adventure Pack v1.0 - Skis, Ice Axe and Backpack for Winter Adventure Sports

Astronaut Tools Kit v1.1 - Space drill, pick, geologic collection scooper, camera and other Astronaut stuff

BBQ Tools Kit - You read that right, even Dummy 13 likes to grill up some burgers now and then

Roadside Assistance Kit - Traffic cones, a bottle jack and other tools

Big thanks to Lucky 13 Toys (Soozafone) for sharing the awesome Dummy 13 (v1.0) model with the world. The Dummy 13 model (which this was designed for) is shared under the following license:

Note - if you see these for sale on Amazon , Etsy or anywhere else, they are not being sold with my permission. There are no "authorized" sellers of these models. They were made for the 3D printing community, not for Amazon or Etsy sellers to profit from.

If you find these models useful, please post a like or a comment with some pics of your prints. You can find the other things I'm working on at my blog here. You can also follow me here, on BlueSky or on MakerWorld, to get news on any new stuff I post.

If you would like to support my work, you can “Boost Me", or  even Buy Me A Coffee using this link:

https://www.buymeacoffee.com/mystoopidstuffmystoopidstuff

Thanks for looking!

Changelog:

Update 2-26-2024: I made a minor change to the backpacks, which now have a slightly longer peg.

Cover photo Credits:
National Aeronautics and Space Administration
https://history.nasa.gov/alsj/a17/images17.html#MagA
https://history.nasa.gov/alsj/a17/AS17-147-22470HR.jpg

Also thanks to the following makers, whose models I used in making the cover image for this thing:

INVASION! The electric tea light UFO
by DrKronos

Cow 
by Orto

AT-ST Walker Kit Card
by Nakozen
 

Changelog:

12/21/2024:  Updated the model and 3MF with a carded option.  The card has all the armor parts on a card. The 3MF has as multicolor and single color option. 

This is an Astronaut remix of Dummy13, designed for single color printers