40k Led Display Shelf

This is a table top miniature shelf for displaying miniatures with a 32 or 40mm base. The mini will fit if it is less than 45mm wide and shorter than 58mm tall (with base). It fits space marines very well. The shelf can be used without the led cover or battery box. The led cover has channels for the led wiring path (see picture). The battery box should be glued to the bottom of the case and has 3 alignment tabs to locate the proper position on the bottom side of the display shelf. The wall mount screw holes will fit a screw that is less than 4.5mm thick. The battery box can fit a switch that is 13.5mm by 8.5mm. Led lights can be attached to the back of the cover with a small drop of super glue or hot glue.  I've attached links to the parts I used to complete this project. I hope you enjoy it!

Other Parts

Switch: https://a.co/d/bs2yzDj

Rechargeable 9V: https://a.co/d/7KgbEm2

Led Lights: https://a.co/d/6ySs4t6