The nozzle case needs two pieces of filament for the hinges. The main hinge that joins the lid and bottom of the box is 35mm. The latch hinge requires a piece of filament that is 20.20mm in length. I went slightly longer on both of mine so I could melt the tips a little to keep the filament from slipping out. I've included both .stl files and .3mf files. Also, there are 2 different style lids, 1 has the different size nozzles labelled on the inside and the other is blank.
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
No
Resolution:
.12
Infill:
50%
Filament: Esun Pla+ and Priline Carbon Fiber Pla+ and Carbon Fiber Red and Carbon Fiber Black
Notes:
Most overhangs on this model are between 60 and 76 degrees so supports should not be needed.
Category: 3D Printer AccessoriesThe author marked this model as their own original creation. Imported from Thingiverse.