Penguin Peril

Easy to print and even more fun to play!

Suggested Print settings:

• White and Blue PLA
• 45-75mm/s outside walls
• 4 or 5 Top/Bottom layers
• 3 walls
• 10% infill
• No supports Required (we built them in for you)

print everything face down or use your pre setup file for easier printing!

I added a simple 8 Sided Die to the print files i recommend printing it at 0.1mm if you dont already have one

Revisions:

• Nov 28 - Adjusted a minor tolerance issue with the outer play area being slightly too big. moved the size from 100% to 99.25% in scale and appears to be tighter against the interior tiles!