I have created a 3d printed version of the display stand used to create the brilliant esp32 weather display by Imarzen.
Link to the project (not created by me) is here:
https://www.hackster.io/lmarzen/esp32-e-paper-weather-display-a2f444
with GitHub project here:
https://github.com/lmarzen/esp32-weather-epd
I have two versions but don't require supports to print. I had some issues with the print lifting off the print bed so created the version with triangular openings in the upper surface to try and alleviate the problem.
I finished the print by covering it with an oak veneer.
Edit:
Added models for a 2 or 3mm acrylic backing to support the screen.
The author marked this model as their own original creation.