X/Y endstop Relocation for Ultra Light X Beam with Aluminum XY Joints by Common Anomaly

Update (22.11.23): Made the Jst Hole a bit more snug.
Update (28.11.23): Switch now as a bit more space. was to tight

Created as an option to keep physical endstops with the CA X Beam. Particularly useful when using TMC5160 stepper drivers, as these are rather annoying for sensorless homing. And if this is too imprecise, its prone to triggering too early and subsequently crashing the toolhead. And I personally do not like the fact that I can no longer trust my printer.

Switch needs to be secured with at least 1 M1.6 self tapping screw.
 

Made for those:
https://west3d.com/de-de/products/elite-ultralight-x-beam-for-voron-v2-4-and-trident
https://www.fabreeko.com/products/ultra-light-x-beam-with-aluminum-xy-joints-by-common-anomaly

The X endstop is completely made by myself. The Y Endstops is a modified Voron A Drive, inspired by HartK