Voron 2.4 & Trident Tophat 66mm

Previously to everything else, if you would need an adpated Version, like different Panel Size etc., just DM me and i might adapt and add it.

(TBD) Modded back pieces for Umbilical Passthrough

(06.09.2024) Screwable Retainer Lid for the Panel. To accomodate for different thickness of panels

(01.02.2024) Added CAD Files and made the 66mm Version to be screwed down

(04.09.2023) Updated to newer Version slightly incresed thickness, to minimize artifacts

This Tophat grant extra travel for Z so your bowden and possible Umbilical/Can Wires don't hit the top panel and get squeezed.
 

Right now made for Standard 3mm Panels. If asked, i will try to do for thicker Panels

Disclaimer: This Modell likely needs you to calibrate shrinkage before.

BOM: (for Basic Configuration | not including LED Mounting or special Skirts)

Printed Parts: 

• 2 Panels of each type (look for your desired size)
• 4 Connector Plates
• 4 Cover Plates

Hardware:

• 24x Heatset Inserts
• 32x | M3x8
• 16x | M3 Hammernuts or T-Nuts