After buying a Ghost case for my Pixel 8 Pro, I wanted to create something to hold my phone and watch on my nightstand, that allowed me to easily see the time on the phones always on display, and use the qi2/magsafe capability that the Ghost case added.
I have only tried this with the phone (Pixel 8 Pro) and watch (Pixel Watch 2) that I own. If it turns out that this will also work with other pixels (or need small modifications to work with other phones and watches) please let me know and I will update this description (or try and add some extra versions)
Here is the case that I am using in the pictures - https://dbrand.com/shop/ghost/pixel-8-pro-clear-cases
But I expect anything with strong enough magnets will work.
Here is the magsafe charger that I am using in the pictures - https://www.amazon.co.uk/dp/B095BZFX4L?psc=1&ref=ppx_yo2ov_dt_b_product_details
I have tried it with the official Apple magsafe charger and that also fits.
I am still very new with fusion 360 and there are some rough edges on this that I just couldn't figure out how to fix. So edits are welcome.
As for printing it, I didnt want the stand to require two hands to detach the phone from the magnet, so I wanted it to be as heavy as I could make it (which is why it also has the long silly tail). To acheive this I printed it with 100% infill. You can avoid this by sticking the stand down with some 3m tape, but I didnt want it to be that fixed in place.
I also printed it at 0.2mm layer height and I used organic/tree supports
I did however stick the watch charger in with some blutac, as it is a little loose
NOTE: For pixel watch 1 users, please see the remix tab
The author marked this model as their own original creation.