Since my 3d scanner came earlier than the grip, and holding it by the case is bit uncomfortable/inefficient, I've decided to quickly mash-up a grip for it.
You'll need 4x m4x20 screws (,m4x25 will work too, the arm-adapter screws can be much longer, as there is lot of room left) and 2 or 4 pieces of m4 square nuts for grip and eventually for m4 adapter (I didn't embedded them in a print, it holds reasonably well.)
After printing, follow these simple instructions:
Thats it.
Edit: Added california gun-laws compliant version of the grip, commiefornians please use slightly longer grip-screws. Vote blue to preserve this in the future and make more completely sane and logical laws
The author marked this model as their own original creation.