I printed this but the blade holders were too spaced to fit snug so they fall out. I used silk PLA. (edited)
Deburring Tool Case Print In Place
Deburring tool case based on the model by Markus, added a print in place hinge and magnets for closing the case.
338
1522
8
5836
updated May 24, 2024
Makes
Comments
I love this. Great work. I will advertise your work as the model of the month on my website :)
Really good model, i have used quite strong magnet, therefore upper mabgets 4x I was forxed to use glue, otherwise nozzle during travel over magnet's catch them. But at the end those magnets which should close cover does not work. Idk why , as said i have used really strong magnets. Position are corect
Came out great, but my deburring tool does not fit. Good first time using embedded magnets.
very good and sturdy design. open and close function is working smoothly. magnets must glued when the prints paused.
The design works great. Everything fits perfectly. Thank you very much!
Nice case, but the blades don't stay in their spots. They fall right out.
P1P, PLA (edited)
@TheLoopyStit_1966115 did you use the required magnet for the blade? i can close the case very rough and it won’t fall
Very good design, but I had a problem with a stuck hinge. But that turned out okay.
Hello, what size has the magnets to be?
@JavierToscan_1996609 hi, magnets should be 6X2
Fantastic and handy model. Thank you so much. Printed in Bambu Lab PLA Basic Black and 3D Jake light blue PLA.
Gedruckt in PLA von Sunlu. Funktion einwandfrei