Deburring Tool Case Print In Place

Deburring Tool Case for the aliexpress deburring tool.

fits 10 blades and the tool.

print in place model using 14 magnets (6X2) for securing the blades and closing the tool box.

stop the print at height 2.8mm (10 magnets), 17mm (4 magnets) - make sure to check the orientation of the magnets so they would work well.

The new case is print in place, no need for any screws.

the magnets I used are 6X2, you would need 14 magnets compared to original 30.

the closing is with magnets too so no need for printing latches.