iPhone 15 Pro case with action button - customizable

iPhone 15 pro case 

Support the designer:

• Donate Bitcoin here: bc1q9mhh7l53mmlnqqmazdnr6gele0smrzkunclfvj
• Donate Ethereum here: 0x36CA6EEF3700ff18858f195706C5E3A9d6458241

I went through a few iterations to make this case perfect. There's a few features that make it really good:

• Buttons are all have a good click to them.  No inconvenient holes, all buttons are covered, including the action button.
• The case has a tight grip on the phone, doesn't slide out easily.
• Case also has a cutout to add an extra mgsafe ring you can buy on Aliexpress.
• Camera bump guard is split from the case, so you can print it in different materials like PLA or TPU and different colors.
• Added two versions:
  • one with a nice honeycomb pattern
  • another simple without any pattern
• relatively easy to print without bulging or other critical problems

Assembly:

• insert the camera bump guard first in the right direction
• finally insert your phone!

How to print:

• TPU 95: a strong flexible filament is required for the case
• Camera bump guard can be print in TPU or PLA.
• Use supports on tight overhangs on the case like the buttons and speaker and port bridges.
• I recommend 15% infill, for better clickiness of buttons.
• If you want the cool effect to highlight the honeycomb pattern in a different colour, you'll need to add a stop at layer 2 and 3. This means you'll start with TPU, change to the other colour at layer 2 and revert to TPU at layer 3.

Update log:

• 2023-11-04: added more tolerance on buttons inside face (0.2) to make them better for clicking with less pressure on the button. Also added a fillet on the inner side of the case overhang to make it less stringy.
• 2023-11-07: re-built with more accurate dimensions and more streamlined buttons and honeycomb pattern.
• 2023-11-08: More tolerance around action buttons and deeper button trenches around the button
• 2023-11-10: pulled back 1mm off the top boarder and smoothened it out so that it doesn't interfere with the screen gestures off the sides.
• 2023-11-11: added chamfers to the edges of the case to make the print bulging proof and a better design altogether. Also added a cutout to add an extra magsafe ring you can get on amazon or aliexpress with an inner diameter of 43mm and outer diameter of 48mm max.
• 2023-11-13: changed buttons to removable buttons with a cutout. This makes their “clickability” much much nicer and also ads more opportunities for personalizing the case with colors!
• 2023-11-14: improved placing of camera bump cutout and a fillet that makes the camera bump flish with the phone.