A skeleton themed snap together moveable figure, optimised for 3D printing.
70
183
0
840
updated December 8, 2023

Description

PDF

This is the first themed version of my original moveable figure that I hope reaches you in enough time to get printed for Halloween. The figure reuses a lot of the parts from the original model with only the body, hips and legs being different. To avoid duplicate models I have only included the different STLs in the individual STLs section. I have however included the complete part STLs to save having to download from two separate models. A unique feature to this model, that is now also possible with the base model, is the ability to have hips that swivel at the body. So I look forward to these swivel hips being used with the standard model.

Print instructions:

All files have been printed and tested using various brands and colours of PLA/PLA+ on my Prusa Mk4, Prusa Mk3S with MMU2S and my frankenstein 180x180mm bed slinger with the following settings:

  • Nozzle size 0.4mm
  • Layer height 0.2mm
  • 2 perimeters

I haven't found any other setting to affect the fit and function of the assemblies however for the head it is beneficial to observe where the seam placement will end up in the slice preview. the head to neck fit is dependent on your extrusion multiplier calibration. The default settings for both of my Prusa's provide the desired fit.

Assembly instructions:

Please refer to the assembly instructions in the original model.

Tags



Model origin

The author remixed this model.

Differences of the remix compared to the original

Skeleton themed versions of the body, hips and legs derived from the original model.

License