Ender 3 V2 Neo X-Axis Raspberry Pi Camera Mount

For those with Ender 3 V2 Neo printers, this is the camera mount for you.  This camera mount is easily assembled and does not require any metals screws or non-printed parts to mount your Raspberry Pi camera in place where it can travel with your printer's hotend as your prints materialize.  

Simply print each of the model files (making two copies of the bolt and nuts) and slip the printer_cap over your printer's x-axis.

Credits ( Please Retain on Derivative Works)

This model was remixed from the camera mount work by mfraz74 and the printer cap base by RobF

Additionally, the bolts and arm links originated from An0b1s

This model distinguishes itself from its source model in that it replaces the ball joints with a lightweight rigid arm with printed bolts that can be tightened.  These changes help to limit undesirable shifting overtime of the camera's position and angle as it travels along with the x-axis during prints.  

Additionally, the arm's attachment has been moved lower so that it can be automatically positioned at an appropriate angle to the bottom of the hotend.  The camera shell and lid have been thinned out to both decrease weight and enable additional space for thicker raspberry pi cameras.

If printing at the right orientations, supports may only be needed for the camera_shell.stl

Note: Also works with Ender-3 S1.