FOUR COLOR - HueForge Darth Maul multicolor

OPTIMIZED FOR SINGLE AMS OR FOR THOSE THAT WANT TO USE LESS COLORS

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
    PLA PolyLite Black Transmission Distance: 0.3
    PLA PolyTerra Charcoal Black Transmission Distance: 0.3
    PLA PolyTerra Army Red Transmission Distance: 0.3
    PLA PolyLite White Transmission Distance: 5.2

Swap Instructions:
    Start with Black
    At layer #25 (2.08mm) swap to Charcoal Black
    At layer #45 (3.68mm) swap to Army Red
    At layer #52 (4.24mm) swap to White for the rest.