***If you like what you see please give a “Like” and a “Follow”! The goal is to get over 200 followers!***
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
JAYO Black Transmission Distance: 0.3
PolyTerra Army Red Transmission Distance: 0.3
PolyLite Blue Transmission Distance: 1
JAYO White Transmission Distance: 6
Swap Instructions:
Black until layer #5 at 0.48mms
Army Red until layer #10 at 0.88mms
Blue until layer #19 at 1.6mms
White until layer #39 at 3.2mms
The author marked this model as their own original creation.