DampRid Container - Refillable with Damp Rid Crystals

DampRid Container. There are 3 parts: the container, the tray, and the lid. Fill the tray with the DampRid crystals. The tray then sits on a shelf within the container to keep it raised up so water can collect on the bottom. Added a little handle on the tray so its easy to lift out when you need to drain the water. Easy to print and requires no supports.

Print Settings

Printer: AnkerMake M5

Filament: PLA+

Infill: 10% Gyroid

Perimeters: 3

Solid Layers: 5 top, 5 bottom

Supports: No supports required

Layer Height: 0.2mm