Garden Plant Support Stakes

Strong support stakes to help brace and hold up a plant. We had pepper plants in the garden that were leaning over as the peppers grew. Made these to help them stand up straight.

I made 3 sizes. I find the Long one to be the best size for use in the garden.

Long - 280mm
Medium - 205mm
Short - 130mm

Print Settings

I recommend using PETG for additional strength and to hold up better outdoors with sun exposure and temperature changes. PLA may work too, but PLA can become brittle in cold temperatures and can break down over time in the sun.

Print laying the flat back part down. The Long version should fit on most printer beds when oriented 45 degrees. 

Printer: AnkerMake M5

Filament: PETG

Infill: 20% Gyroid

Perimeters: 7

Solid Layers: 7 top, 5 bottom

Supports: No supports required

Layer Height: 0.2mm