Prusa Enclosure Filament Guide
Fills hole in top of enclosure with filament pass-thru
34
210
7
1121
updated September 23, 2023
Description
PDFSimple filament guide for single color printing.
Printing parameter:
- Material: PETG
- Resolution: 0.1 mm
- Perimeters: 0
- Infill: 15%
- Supports: no
Assembly:
Press fit two M3n nuts into the bottom piece. Put top piece in the hole in the center of the enclosure lid. Use 2 M3x8 screws from the top to sandwich the enclosure lid between the two parts.
Model origin
The author marked this model as their own original creation.
