HueForge Gengar [Multicolor]

***If you like what you see please give a “Like” and a “Follow”! The goal is to get over 200 followers!***

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA PolyLite Purple Transmission Distance: 0.5
PLA BambuLab Tough Lavender Blue Transmission Distance: 2
PLA PolyLite Pro Light Red Transmission Distance: 1
PLA PolyLite White Transmission Distance: 5

Swap Instructions:
Start with Black
At layer #19 (1.6mm) swap to Purple
At layer #27 (2.24mm) swap to Lavender Blue
At layer #34 (2.8mm) swap to Light Red
At layer #50 (4.08mm) swap to White for the rest.