Fysetc Portable Input Shaper Clamp-on Bed Mount

Credit to WhatAMess13 for the original design.  I found that the screw locations for the bed mount model in their design did not line up with mine.  In the course of playing around with this, I also realized that I didn't like messing around with separate nuts to make the attachment, so I decided to remix the platform to clamp onto the PEI sheet tab with thumbscrews.  I designed it to take short M3 threaded inserts and then I used M3 socket cap screws and these knurled knobs.

Printing Parameters:

• I used eSun PLA+ and a layer height of 0.2mm.
• For best strength and to keep the slot clear, this should be printed on one short edge with tree supports.

Changed bed mount to clamp-on design.