This is a system to organize your drawer or replace an existing drawer inlay.
It uses a grid of 40x80mm, so you can combine any length and width. I have designed two different hights - 60mm and 80mm
To keep the boxes in place, use the interconnects.
Be careful, select the interconnectors with the correct width, the ones marked with "single wall" are for the outer boxes (look at the detail picture, left is a double witdh tee connector and on the right the single width one)
If you want to print longer boxes than 200mm, use the files in the folder for open length parts. You can interconnect them easily and stabilize them with the interconnectors.
Updates:
The author marked this model as their own original creation.