This is a model of a cathedral-ly looking building which shows up in the background of the town Bonesborough from The Owl House. This building is only shown from two angles, so I had to improvise a bit. I had to make up the backside myself.
The model is 150mm long, 94mm wide, and 120mm tall.
Printed at 0.2mm layer height. Does not require supports. I've used lightning infill to save time and filament. I had a lot of stringing.
If you want to support me, you can do so via this link: https://ko-fi.com/printingdaniel#
The author marked this model as their own original creation.