Modular Plant Climber/Supporting Frame

This Plant Climber/Supporting Frame design is very modular and could also be printed at 75% if needed. You can also use just three section to join up - pictures show four section per level.

For base you'll need the spikes which could be glued and then add the Stick and Frame, to go taller just add more sticks/frames.

I printed this in PLA but print with what filament you think best.

I've added print files (100% & 75%) with brim on Stick/Spike and supports on Frame, otherwise slice how you see fit.

BTW I had to borrow a neighbours plant to do photos 🤣

Designed in metric units, adjust in your slicer accordingly.

Please post pics of your finished model, give it a rating and kindly show us your prints.

I try to keep all my designs free & don't wish to move to Printables Clubs, a small donation via my Buy Me a Coffee would be kindly appreciated.

All my designs and images used are not commercial free and are copyright of ©D3DCreative

By downloading my models you may not share any of the Images/STLs/GCode etc to any other persons or platforms e.g. thingiverse/makerworld

By downloading my work you agree to the above terms set out by me.