Rocket Money Savings Piggy Bank

I printed this at .15 layer height but .20 should work, add supports to the wings and the main body may require supports for coin slot. For a two colour body add colour change at 110mm in your slicer.

Low Poly Version can be found here. 🤗

You can print the Wing Thrusters and Body Plug all at the same time. 

Assembly Required - I recommend using super glue or 3d gloop.

Glue Thrusters into bottom of wings and glue wings to rocket body.

Tolerance is tight and may need slight post production. 

Designed in metric units, adjust in your slicer accordingly.

Please post pics of your finished model, give it a rating and show us your Rocket Savings Bank.

I try to keep all my designs free & don't wish to move to Printables Clubs, a small donation via my Buy Me a Coffee would be kindly appreciated.

All my designs and images used are not commercial free and are copyright of ©D3DCreative

By downloading my models you may not share any of the Images/STLs/GCode etc to any other persons or platforms e.g. thingiverse/makerworld

By downloading my work you agree to the above terms set out by me.