Sony E-Mount NEX Lens Back-cover

Back cover for Sony E-Mount Lenses.
54m
1× print file
0.20 mm
0.40 mm
11.00 g
60
384
9
1161
updated January 7, 2024

Makes

Comments

Print is a bit tight on my 16-50mm kit lens for my a6000 so I am probably going to need to scale it up by a bit to get more clearance. However it worked great on my C/Y to NEX converter.

Printed at .20 mm on my Bambu Lab A1 with supports.

Anybody ever make a modification of the to fit the rear of the Sony 1.4x and 2x teleconverters? They are just enough deeper that standard rear caps don't fit and somehow I lost my original. Maybe if I learn the modeling software I'll try my own hand at it, but if somebody else felt the urge please share!

Printed nicely, didn't need supports.

Printed it to have a cap for the DIY macro lens designed by 'thenickdude'.
https://www.printables.com/model/143754

I also tried it on my sony lens and it fit but perhaps a little to snugly. But that may be because of the .6 nozzle on my ultimaker.

Either way I'm happy with it. (edited)

Thanks for this! Pulled my supports off and it slid on very nicely!

Great model and fits the lens very well. Thank you!

Nice design! Easy to print and fits very well.
Printed with Prusa Mini, PLA Galaxy Silver and without supports.

Fits perfectly, thank you! I was able to print without supports (on Mini+), no issues. I used PolyTerra PLA Black.