Upgraded carriage, sled and filament guide for Bambu Lab P1 / X1 / X1C / X1CC Filament Spool Switcher & Winder
Slightly changed carriage, sled and filament guide
103
890
6
6135
updated September 4, 2024
Model files
slede.stl
carriage.stl
aangepaste_filament_guide.stl
Model origin
The author remixed this model.
Differences of the remix compared to the original
Added a “lip” to the carriage to hold and guide the sled because when it was under too much load it could bend upwards.
Repositioned holes in sled and made them a bit bigger so threaded inserts could be used for the screws to position the filament guide.
Made a small adjustment to the teeth of the sled, having more tolerance now.
Redesigned the filament guide to fit in the upgraded parts