Upgraded carriage, sled and filament guide for Bambu Lab P1 / X1 / X1C / X1CC Filament Spool Switcher & Winder
Description
PDFUpdate - 04/09/2024
- Redesigned the complete model from scratch because some "friendly" user notified me of possible flaws in the design.
- Repositioned the holes (in sled as well as the filament guide) and made them a bit smaller (sled) to fit the Ruthex M3x5.7 threaded inserts
Update - 28/07/2023
- made top border a bit bigger to make a better fit for the threaded inserts
- Fine-tuned the teeth on the sled, no more “hiccups” should appear now
Added a “lip” to the carriage to hold and guide the sled because when it was under too much load it could bend upwards.
Repositioned holes in sled and made them a bit bigger so threaded inserts could be used for the screws to position the filament guide.
Made a small adjustment to the teeth of the sled, having more tolerance now.
Redesigned the filament guide to fit in the upgraded parts
Model origin
The author remixed this model.
Differences of the remix compared to the original
Added a “lip” to the carriage to hold and guide the sled because when it was under too much load it could bend upwards.
Repositioned holes in sled and made them a bit bigger so threaded inserts could be used for the screws to position the filament guide.
Made a small adjustment to the teeth of the sled, having more tolerance now.
Redesigned the filament guide to fit in the upgraded parts
