HueForge Deadpool

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PETG JAYO Black Transmission Distance: 0.3
PLA PolyTerra Charcoal Black Transmission Distance: 0.3
PLA PolyLite Wine Red Transmission Distance: 1
PLA PolyLite Black Transmission Distance: 0.3
PLA PolyTerra Army Red Transmission Distance: 0.3
PLA PolyLite Pro Yellow Transmission Distance: 11
PLA PolyLite Steel Grey Transmission Distance: 1
PLA PolyLite Pro Cold White Transmission Distance: 0.5

Swap Instructions:
Black until layer #9 at 0.8mm
Charcoal Black until layer #10 at 0.88mm
Wine Red until layer #11 at 0.96mm
Black until layer #12 at 1.04mm
Army Red until layer #15 at 1.28mm
Yellow until layer #20 at 1.68mm
Steel Grey until layer #42 at 3.44mm
Cold White for the rest.