Bambu Lab - Stand For Scraper - Stick and Liquid Glue - Filament Cutter - Three Versions

Hello Everyone
 

This time I am sharing stands for Scraper, Bambu Lab glues in liquid and stick versions and Filament Cutter. The scraper, glue stands and filament cutter are identical in design to my other Scraper Stand project. It has the same height. It only differs in width and length. The first without a logo, the second with a protruding logo and the third with a logo to color. At the bottom of the stand is located there is space for 4 non-slip silicone pad with a maximum diameter of 8mm. The height of the silicon pad I used is 1.5 - 2.5mm. They prevent the stand from moving when next to a working printer. You can buy them in any large DIY store or furniture accessories store for about 1.50 euros for 50 pieces. Their use is not mandatory. You can download individual files for printing or a ready-made colorful .3mf project containing all versions and change only the colors of the filaments.

When you complete the project, please share a photo and a comment. Thank you and have a nice day.
 

 
You can also download my New Scraper and Filament Cutter model to match this project :

https://www.printables.com/pl/model/453705-bambu-lab-scraper-double-sided-logo

https://www.printables.com/pl/model/526794-bambu-lab-filament-cutter-45deg

Versions Available : 

Bambu Lab Stand for Scraper - Glue Stick - Filament Cutter :

• No Logo - Protruding Logo - Color logo
• Dimensions : 115 x 43.3 x 40mm

Bambu Lab Stand for Scraper - Liquid Glue - Filament Cutter :

• No Logo - Protruding Logo - Color logo
• Dimensions : 117.4 x 44.6 x 40mm

Bambu Lab Stand for Scraper - Stick and Liquid Glue - Filament Cutter :

• No Logo - Protruding Logo - Color logo
• Dimensions : 153.6 x 44.6 x 40mm 

IMPORTANT - READ:
Please note that printing a stand with a colorful logo takes a long time. Consider choosing a version without a logo or a version with a logo but without color.
 

How to print ? :

• Material : Any
• Layer Height : 0.2mm
• Wall Loops : 2-3
• Bottom Layers : 3
• Top Layers : 4
• Infill : 20% (I print with 50% infill because I want it to be heavy and massive)
• Seam Position : Back
• Support : No
• Brim : No