Abstract Cat 5 - HueForge

This is the result of me experimenting with different b&w cats and HueForge.  I really liked the way this one turned out and wanted to share it.

It was made by using Midjourney, using the imagine of “cat, drawing, sketch, blackwork, bold, isolated”.  The image was modified a bit to make the background transparent.  It was then put into HueForge and printed out.

Attached is the zip file with the HueForge Project.

Uses a 0.4mm nozzle.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3 ← You can use any black, the darker the better.  I think a matte black would work really well.
PLA PolyLite White Transmission Distance: 5 ← Best if this has a high transmission distance, meaning, that it allows for the black underneath to show through.

Swap Instructions:
Black until layer #6 at 0.56mm
White for the rest.