This is a filament painting of a very spooky ghost.
It was made by using Midjourney, using the imagine of “ghost, vector logo, isolated, white background”. The image was modified a bit to make the background transparent. It was then put into HueForge and printed out.
Attached is the zip file with the HueForge Project.
Uses a 0.4mm nozzle.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA PolyLite Azure Blue Transmission Distance: 16
PLA PolyLite Aqua Blue Transmission Distance: 7.5
PLA PolyLite White Transmission Distance: 5
Swap Instructions:
Black until layer #5 at 0.48mm
Azure Blue until layer #21 at 1.76mm
Aqua Blue until layer #32 at 2.64mm
White for the rest.
The author marked this model as their own original creation.