Among Us Interactive models – crewmates and imposters

We created interactive "Among Us" models: crewmate models that separate in half, and imposter models with knives.
9
59
0
443
updated June 21, 2023

Description

PDF

Since the model is free, please consider subscribing to our Youtube channel here: https://www.youtube.com/channel/UCnXgPCj_NgizXnv_ArxK2TQ   

3D print your own Among Us crewmates and imposters! For the crewmates, there is a model that separates in half to expose the bone like in the game, a solid one-piece model, and a model with hands. The model that separates in half can be printed with either spaces for 7 x 2 mm magnets to hold the pieces together, or a peg that fits into the other half to hold it together. For the imposters, there is a model with the knife down and a model with the imposter holding the knife up.  For full project details and available 3D models, visit our website at makeitlabchannel.com.

 

I printed the Among Us figurines with the following settings:

 

3D Model slicer: Cura version 4.13.1

3D Printer: Ender 3 Max

Layer Height: 0.2 mm

Nozzle temperature: 200 degrees C

Bed temperature: 60 degrees C

Retraction speed: 50 mm/s

Retraction distance: 6.5 mm

walls: 3 

Print speed: 50 mm/s 

Infill percentage: 15%

Infill pattern: Gyroid

Support type: Cura Tree Supports

support walls: 1

Support interface pattern: Grid

Build plate adhesion: Brim (brim line count of 10)

Tags



Model origin

The author marked this model as their own original creation.

License