Securely latching variable size print in place box
17
142
2
598
updated June 17, 2023

Description

PDF

This is a the second in a series of latching print in place boxes, this version has two latches and is more suitable for wider boxes. Just like the first version it will securely hold shut even if dropped. There is a grove in the lower haft for an optional seal made of 1.75mm TPU filament. This will NOT make the box water proof merely more water resistant. 

To start off I have uploaded sixteen versions of this box delineated by internal dimension. The size is listed at the end of the file name by _width_length_depth in millimeters. I can upload other sizes in the future if requested. The box can be any reasonable width or length but must be between 43mm and 70mm in height.

Printing

Before printing the box make sure your printer can pass a .15mm clearance test. One mimicking the hinges of this box design is uploaded in the files here. If you are unable to break the hinge free in the test don’t print this box until you have corrected that in your print settings.

Supports are needed to print this design; they should be focused around the latching mechanism shown below.

For the shortest version the supports under the outer latch are unneeded as it will rest on the build plate. 

Tags



Model origin

The author marked this model as their own original creation.

License


Highlighted models from creator

View more