Raspberry Pi CSI HDMI Mount

Simple mounting Solution for your CSI or DSI to HDMI Adapter. 

If you didn't know: you can use these adapters to route the DSI signal (for a Touch Display like BTT PI TFT 50 or Waveshare 5" DSI) trough the HDMI cable, which is a lot more durable than a long DSI cable.

BOM:

• 1x this print
• 4x M2.5 x 15mm Standoff (you can print them, if you don't have them)
• 4x M2.5 x 6mm Screws
• 4x M2 Screws for HDMI CSI Adapter

Obviously:

• 1x CSI HDMI Adapter obvio
• 1x Raspberry Pi

The fan mount that is visible under my mount is from WyonimgWolf and can be found HERE