RatRig V-Core 3.1 Filament Guide

I designed this part as an addition to @PicklesTheCat 's internal spoolholder (https://www.printables.com/de/model/314528-ratrig-vcore-internal-spool-holder-filament-path)

It has an internal thread and allows you to screw in the PC4-M10 quick connectors. The thread is long enough to screw two of them against each other to prevent the ptfe from moving.

Settings:

• Layer height: 0,2mm

Material: 

• ASA (or anything that can handle the temps in your Printer)