Baseplate and Stands Remix - Gridfinity Glue Up Jig

UPDATE 1 (07/06): Added a stackable version of the adaptor, as well as stands for all three models (original base and magnet carrier by Jools and the baseplate adaptor).

This model is used in conjunction with the original file by Jools to insert magnets in Gridfinity baseplates. As it uses the same orientation tool as the original, magnets are automatically correctly aligned to those inserted using the original model.

STEPS (see also pictures)

• Fit the Glue Up Jig of the original model into this model (the magnets of the Glue Up Jig should face towards the baseplate adaptor)
• Place magnets on the other side of this model
• Place it into the Gridfinity baseplate
• Remove the Glue Up Jig
• Remove this model

Print Settings:

• 0.4mm nozzle
• 0.2mm layer height
• Supports ENABLED

Liked this model? Have a look at the rest of my Gridfinity Collection models:

Parametric Gridfinity Bottoms 

https://www.printables.com/model/491143-parametric-gridfinity-bottoms-gridfinity-model-bas

Baseplate and Stands Remix - Gridfinity Glue Up Jig 

https://www.printables.com/model/491752-baseplate-remix-gridfinity-glue-up-jig

Compact Deburring Tool Case 

https://www.printables.com/model/491520-compact-deburring-tool-case-gridfinity-plain

Drill Bit Holder 

https://www.printables.com/model/492258-gridfinity-drill-bit-holder-3-10mm

Impact Socket Storage 

https://www.printables.com/model/492465-gridfinity-impact-socket-storage-12-metric

Soldering Spool Holder 

https://www.printables.com/model/494455-gridfinity-solder-spool-holder-singledoublexxl

Dremel Bit Storage

https://www.printables.com/model/502366-gridfinity-dremel-bit-storage