Elegoo Neptune 3 Plus MCU Fan Bracket
Fan bracket to run the stock fan in the proper location without the bottom cover.
8
23
0
636
updated May 21, 2023
Description
PDFI was planning on doing projects needing access to the MCU, but didn't want to take off the bottom cover and fan every time.
This was printed in PETG because it is what was in the printer at the time, probably not necessary.
0.20 layer height.
It's attached the lower 2020 exrtusion with M4x30 screws and hammer head t nuts.
Tags
Model origin
The author marked this model as their own original creation.
