Voron Trident PTFE Guides

A guide to help the PTFE/reverse bowden tube do the somewhat sharp 90 degree bend into the extruder
158
851
17
3782
updated April 23, 2023

Description

PDF

Trident PTFE Guides

Printing:

  • Default voron settings, correct orientation, no supports needed!

Bom:

  • Only printed parts.

Description:

  • Made to guide the PTFE tube uniformly into the extruder, and avoid rubbing against the top panel.
  • One 90° version and one 105° version.
  • The idea with the 105° is to point the PTFE tube slightly downwards so that it don't collide with the top side extrusions as badly, and / or bind up in them.

Note that this is intended to be used with an LGX Lite extruder, so i can't say if it will clear the top panel on a printer running a regular LGX, CW1 or CW2!

Pictures:

- - -

In case I forget to upload any eventual updates i make to the design to Printables, the latest released version should always be avalible on my gitub!

Tags



Model origin

The author marked this model as their own original creation.

License