Girlfriend approved design...
Yin-Yang Cats Coaster
Yin-yang coaster, but with cats.
No MMU required!
33
175
2
817
updated July 12, 2023
Makes
Comments
Is this print designed for an MKS3S+ with an MMU2 attached or can I print it on a basic MK3S+?
@WiccaWacca_186993
You can print this model with or without an MMU.
If you don't have an MMU, you'll simply perform the one color change manually.
I've updated the model description for clarity.
Printed in the given orientation (design-side down) at 0.16mm/layer. 0.20mm/layer should also work, too. (edited)
This is the strangest thing. When I try to slice this model at 0.2mm/layer, the layers jump from 2.6mm to 3.0mm, completely skipping 2.8mm. The resulting print is... interesting. Is that your experience too?
Update: It appears that the model is faulty. There is actually a gap between the bulk of the coaster and the very top layer that causes the 2.8mm layer to be empty. PrusaSlicer picked this up. Would you like me to try to fix this?
Update 2: I had turned the model upside down for printing, as I believe I can get a flat surface and a better looking print that way. In the original orientation, the problem persists; when printing at 0.2mm/layer, the 0.4mm layer is missing. This might actually come out "okay" but certainly not optimal.
Update 3: If I print at 0.16mm/layer, the problem is bypassed. I'll post a make once it finishes.
Update 4: After talking privatedly with npburns224, the new 3MF file doesn't have the issues I described above. (edited)
@Chmarr If you wouldn't mind saving the plate as a 3MF file and sending it via DM, I'd be curious to see how it opens up on my end. (edited)