DangelDesign - POLYFORTRESS dual 5015 Fan duct
This Fan Duct is in its Alpha Version - Not yet tested or printed
DangelDesign provides the 3DPrinting Community with its new “POLYFORTRESS” - dual 5015 fan shroud/duct
It was designed to fit ENDER 3 MAX but will soon expand to a variety of printers after being tested, if you want a version that doesnt exist yet, please contact JustDangel over Direct Messages or just over Discord : JustDangel #0921
It was planned to get mounted to the Printhead with 8 0.5x0.5cm Magnets, its a rough process tho as the weight of the entire Duct may be too much for those magnets.
Up to date there is no material list as it hasn't been tested yet. → rough assumption:
-2x M4 Hex Nuts, 2x M4 Screws , 4x M3 screws, 4x M3 Nuts, 8x 0.5x0.5cm magnets
PLEASE NOTE:
This Model is in ALPHA Version and was not tested yet, the Online .blend and .stl Files are in the moment the only presence of this fan duct.
It hasnt been printed yet and/or tested, i dont recommend trying to print its ALPHA VERSION as there could be inaccuracys that havent been discovered yet that cause the model to be useless or dont fit to specified parts.
After it gets fully tested it will move onto to its BETA version, where it will be made compatible with More and more different Printer Models. also BL touch adapter gets made
If you wish to wait until the DangelDesign PolyFortress gets released safetly into BETA VERSION and there made printable, please put it into an collection or like it and check upon it once in a while.
If you still wish to print the model in its ALPHA VERSION, DangelDesign does not take responsibility for loss of Filament,Electricity or time this model consumed if it won't work.
-Wait until its tested ;D
If you have any wishes regarding a Adapter for compatibility with other Parts, Hotends, Printers, please Contact me, JUSTDANGEL over Discord (Discord ID listed above) or Direct messages (idk if printables has that function).
Thank you for showing interest in my creation :)
-Dangel
total Printing time of standart full set - 11-16 hours with 0.2mm layer height
The author marked this model as their own original creation.