Buck Box for LM2596

A remix to:

• Fit the commonly found LM2596 based convertor that's slightly larger than the HiLetGo brand at 65x38mm - https://core-electronics.com.au/20w-adjustable-dc-dc-buck-converter-with-digital-display.html
• Remove the hole in the lid and improve horizontal strength.
• Replace the centre vent slices with a hole for the wiring.

Hacked up in Blender because Fusion 360 is a pig on ARM.

Print Settings

Printer: 

Ender 5 S1

Rafts:

No

Supports: 

No

Resolution:

0.24 @ 0.6mm nozzle

Infill: 

15

Author 

Originally remixed from https://www.thingiverse.com/thing:4961492

Sam McLeod (remix)

- Website - <https://smcleod.net>
- Printables - <https://www.printables.com/@SamMcLeod_532698/models>
- Thangs - <https://thangs.com/designer/smj>
- Thingiverse - <https://www.thingiverse.com/s_mcleod/designs>
- Mastodon - <https://aus.social/@s_mcleod>

License

This work is licensed under the Creative Commons Attribution-ShareAlike 4.0 International License. To view a copy of this license, visit <http://creativecommons.org/licenses/by-sa/4.0/> or send a letter to Creative Commons, PO Box 1866, Mountain View, CA 94042, USA.

[Creative Commons - Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)](https://creativecommons.org/licenses/by-sa/4.0/)