{"data":{"model":{"id":"437716","slug":"d20-puzzle-di-holder-markii","name":"D20 Puzzle Di Holder MarkII","authorship":"author","club":false,"excludeCommercialUsage":false,"price":null,"eduProject":null,"ratingAvg":"0E-10","myRating":null,"ratingCount":0,"description":"

D20 Dice Case - Puzzle Box - Mark II

Video showing how it works.

This is a D20 shaped puzzle box. You have to rotate 2 faces in order to unlock it, then you can unscrew it and get to the inside.

This print consists of 4 pieces:

\u2043 d20 Half 20 - the 1/2 with the 20 at the bottom

\u2043 d20 Half 1 - the 1/2 with the 1 at the bottom

\u2043 d20 Lock 11 - the locking side with 11

\u2043 d20 Lock 10 - the locking side with the 10

The d20 Lock 10 goes with the 20 half, and the d20 Lock 11 goes with the 1 half. Very important to get this right.

I recommend the following print settings:

\u2043 Layer height: 0.25mm or 0.20 mm

\u2043 Infill 10%

\u2043 Support Material on bed only for dice Halves

\u2043 No support material is required for the 10 and 11 locking sides

When printing the two halves, ensure the number 1 and number 20 (respectively) are on the bed surface and the middle screw section is at the top. When you import the 1 half, it will look like it\u2019s on the bed but double-check that it is fully on the bed.

When printing the 10 and 11 locks, print them with the numbers facing up, no support material is needed.

I was never a huge believer in the different qualities of different filaments. I always figured plastic was plastic, and cheaper was just as good as the more expensive stuff. Until this project.

I printed 2x of these dice with one brand of filament at 0.25mm, and the two halves screwed together quite easily, and it comes apart quite easily, as expected. I then switched filament so I could print it in a different colour (which happened to be a different brand of filament), and I can\u2019t get the two halves together at all. And they are nearly impossible to unscrew. So, I lowered my layer height to 0.20mm and reprinted. This one works better, but still, not nearly as smoothly as the first filament I used at 0.25mm.

So, I have included in the project 2 additional STL files of just the screw section, plus about 15mm on either side. This way you can test if they\u2019ll screw together nicely with the filament you have without having to spend 4 - 6 hours printing each half only to find out it doesn\u2019t work. (Like I did!)

Assembly

Once all four pieces are printed, start the assembly by screwing the two halves together, and taking them apart several times until they screw together and come apart smoothly. You may need to work them back and forth, slowly getting tighter and tighter as you go. All of the edges should line up perfectly when fully screwed together, and the crack between them should nearly disappear.

Now, completely separate the two halves.

Look at the underside of the 10 and 11 locking sides, and notice the notch in one corner of each. Take a pen knife and trim out the edge of this notch so there isn\u2019t any overhang on the bottom edge. Also check the round hole is clean and has smooth edges, and that the posts on the 2 halves area also clean and any burrs left by the supports are removed.

Line up the hole in the 10 locking side onto the circle post on the 20 half. Notice that the 10 is a little bit (approx. 15 degrees) to the right of centre. Push the two pieces together, then rotate the 10 as far as it will go counter-clockwise. It should go to the point where the right edge of the 10 piece is parallel with the top edge of the 20 half. Or near enough.

The 11 locking side will clip onto the 1 half of the di, and initially sits about 15 degrees left of centre. Once the two pieces are together, rotate the 11 locking side all the way clockwise, until it stops. The left edge of the 11 should almost be parallel to the top of the 1 half.

Now, screw the two halves together.
Rotate the 10 clockwise to lock, and the 11 counter-clockwise to lock.

","category":{"id":"47","path":[{"id":"30","name":"Toys & Games","nameEn":"Toys & Games","description":"Idle hands are the devil's playgrou\u00adnd. Make yourself and your kids busy with some cool 3D printed games. Print items for both indoor and outdoor play.","__typename":"CategoryType"},{"id":"47","name":"Other Toys & Games","nameEn":"Other Toys & Games","description":"Toys for kids of all ages, boys, and girls alike. Play with Flexi animals, fidget toys, dollhouse sets, or swords. Or find a toy for yourself.","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2023-03-31T14:44:51.010597+00:00","firstPublish":"2023-03-30T19:07:33.942364+00:00","datePublished":"2023-03-31T14:44:50.993967+00:00","dateCreatedThingiverse":null,"nsfw":false,"summary":"This is a puzzle box shaped like a D20 for holding all your D&D Dice. To unlock, rotate the 10 and 11 sides and twist.","likesCount":4,"makesCount":0,"liked":null,"printDuration":null,"numPieces":0,"weight":null,"nozzleDiameters":null,"usedMaterial":null,"layerHeights":null,"mmu":false,"materials":[],"dateFeatured":null,"downloadCount":50,"displayCount":631,"filesCount":7,"privateCollectionsCount":8,"publicCollectionsCount":4,"pdfFilePath":"media/prints/437716/pdfs/437716-d20-puzzle-di-holder-markii-16d77bf3-8f52-419e-9eee-59b570bd9644.pdf","commentCount":0,"userGcodeCount":0,"remixCount":0,"canBeRated":false,"printer":null,"image":{"id":"1730909","filePath":"media/prints/437716/images/3618520_a5672af9-5e1d-4c33-bd83-3061609b2cac/featured_preview_img_0260.jpeg","rotation":0,"imageHash":"7QcaHYL4d2eId4iId3iHePWTCoa6","imageWidth":628,"imageHeight":472,"__typename":"PrintImageType"},"images":[{"id":"1730909","filePath":"media/prints/437716/images/3618520_a5672af9-5e1d-4c33-bd83-3061609b2cac/featured_preview_img_0260.jpeg","rotation":0,"imageHash":"7QcaHYL4d2eId4iId3iHePWTCoa6","imageWidth":628,"imageHeight":472,"__typename":"PrintImageType"},{"id":"1730910","filePath":"media/prints/437716/images/3618521_d95d90a9-085e-42fe-9ce1-6f30d3a792f1/featured_preview_img_0263.jpeg","rotation":0,"imageHash":"7dcZFYb4dmd4h4eJd4d3ePpanJ+m","imageWidth":628,"imageHeight":472,"__typename":"PrintImageType"},{"id":"1730911","filePath":"media/prints/437716/images/3618518_ff6c5028-b232-4414-8083-2f145153b068/d20_half_20.png","rotation":0,"imageHash":"aucJJYTHeHePdniLdjeXiPh6ja/n","imageWidth":628,"imageHeight":472,"__typename":"PrintImageType"},{"id":"1730912","filePath":"media/prints/437716/images/3618517_7df6699e-3f94-4ae9-97b5-78df5950d117/d20_lock_10.png","rotation":0,"imageHash":"6/cJDYLHV6iPhnh4dmh4iPh4i4/H","imageWidth":628,"imageHeight":472,"__typename":"PrintImageType"},{"id":"1730913","filePath":"media/prints/437716/images/3618524_b19aefe4-d5d6-468f-b3ef-c49955289015/featured_preview_img_0262.jpeg","rotation":0,"imageHash":"LvgVDYT5hlh5h4d5hoh4eJZob5/n","imageWidth":628,"imageHeight":472,"__typename":"PrintImageType"},{"id":"1730916","filePath":"media/prints/437716/images/3618522_afd04feb-e15c-4cb6-947d-2d582d91a817/featured_preview_img_0261.jpeg","rotation":0,"imageHash":"XgcOTYSMqImGeIivd5aJhniFfzf4","imageWidth":628,"imageHeight":472,"__typename":"PrintImageType"},{"id":"1730914","filePath":"media/prints/437716/images/3618516_89b230a8-0605-4c27-9638-14ceab905e8a/d20_half_1.png","rotation":0,"imageHash":"p+cJHYT3Z3ePhoh9hFiHh/h4jo/3","imageWidth":628,"imageHeight":472,"__typename":"PrintImageType"},{"id":"1730917","filePath":"media/prints/437716/images/3618519_4d81d93d-9985-4f9e-be60-ec7f31bb832a/d20_lock_11.png","rotation":0,"imageHash":"6/cJDYLHWKePh3h4dmmIiPd3fG/X","imageWidth":628,"imageHeight":472,"__typename":"PrintImageType"},{"id":"1730915","filePath":"media/prints/437716/images/3618523_070aad93-457c-49b2-8626-08170820663b/featured_preview_img_0264.jpeg","rotation":0,"imageHash":"mwgGPYb4PhZyJom8c9V3aqqgeS/b","imageWidth":628,"imageHeight":472,"__typename":"PrintImageType"},{"id":"1730925","filePath":"media/prints/437716/images/3618563_756ed27d-8124-4cf7-bc3a-843153b524be/d20_screw_test_b.png","rotation":0,"imageHash":"qecJHYTXeHd+hoePdDiYduh5j573","imageWidth":628,"imageHeight":472,"__typename":"PrintImageType"},{"id":"1730926","filePath":"media/prints/437716/images/3618561_ab31f20a-8be3-4bf0-84a4-c405e379439e/d20_screw_test_a.png","rotation":0,"imageHash":"qucFHYTHeHh+h3ePdEiYded5f533","imageWidth":628,"imageHeight":472,"__typename":"PrintImageType"}],"tags":[{"name":"dungeonsanddragons","id":"1922","__typename":"TagType"},{"name":"dice","id":"1932","__typename":"TagType"},{"name":"d20","id":"5874","__typename":"TagType"},{"name":"puzzlebox","id":"9449","__typename":"TagType"}],"thingiverseLink":null,"filesType":null,"previewFile":{"id":"1906083","filePreviewPath":"media/prints/437716/stls/3618513_88ac1e1b-92b3-49f4-841c-9f375400dbe6/d20_lock_11_preview.png","__typename":"STLType"},"license":{"id":"3","disallowRemixing":false,"__typename":"LicenseType"},"remixParents":[],"remixDescription":null,"__typename":"PrintType","user":{"id":"44179","handle":"Penwiggle_44179","verified":false,"dateVerified":null,"publicUsername":"Penwiggle","avatarFilePath":"","badgesProfileLevel":{"profileLevel":3,"__typename":"BadgesProfileLevelType"},"__typename":"UserType","isFollowedByMe":false,"canBeFollowed":true,"billingAccountType":"personal","lowestTierPrice":null,"highlightedModels":{"models":[{"id":"26204","name":"Laptop Stand and Mouse Holder","slug":"laptop-stand-and-mouse-holder","ratingAvg":"0E-10","likesCount":7,"liked":null,"datePublished":"2020-03-21T07:26:51.219860+00:00","dateFeatured":null,"firstPublish":"2020-03-21T07:26:51.219860+00:00","downloadCount":113,"mmu":false,"category":{"id":"27","path":[{"id":"21","name":"Gadgets","nameEn":"Gadgets","__typename":"CategoryType"},{"id":"27","name":"Computers","nameEn":"Computers","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2020-03-21T07:26:51.231748+00:00","image":{"id":"126680","filePath":"media/prints/26204/images/263317_afe3f0ab-8b9b-4903-9ab5-3b58837936ab/laptop-stand-1.jpeg","rotation":0,"imageHash":"XEgKFQqGmJCH2FunWHV3iLmpX5UG","imageWidth":1440,"imageHeight":1920,"__typename":"PrintImageType"},"nsfw":false,"club":false,"price":null,"user":{"id":"44179","handle":"Penwiggle_44179","verified":false,"dateVerified":null,"publicUsername":"Penwiggle","avatarFilePath":"","badgesProfileLevel":{"profileLevel":3,"__typename":"BadgesProfileLevelType"},"__typename":"UserType"},"latestContestResult":null,"__typename":"PrintType"},{"id":"437716","name":"D20 Puzzle Di Holder MarkII","slug":"d20-puzzle-di-holder-markii","ratingAvg":"0E-10","likesCount":4,"liked":null,"datePublished":"2023-03-31T14:44:50.993967+00:00","dateFeatured":null,"firstPublish":"2023-03-30T19:07:33.942364+00:00","downloadCount":50,"mmu":false,"category":{"id":"47","path":[{"id":"30","name":"Toys & Games","nameEn":"Toys & Games","__typename":"CategoryType"},{"id":"47","name":"Other Toys & Games","nameEn":"Other Toys & Games","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2023-03-31T14:44:51.010597+00:00","image":{"id":"1730909","filePath":"media/prints/437716/images/3618520_a5672af9-5e1d-4c33-bd83-3061609b2cac/featured_preview_img_0260.jpeg","rotation":0,"imageHash":"7QcaHYL4d2eId4iId3iHePWTCoa6","imageWidth":628,"imageHeight":472,"__typename":"PrintImageType"},"nsfw":false,"club":false,"price":null,"user":{"id":"44179","handle":"Penwiggle_44179","verified":false,"dateVerified":null,"publicUsername":"Penwiggle","avatarFilePath":"","badgesProfileLevel":{"profileLevel":3,"__typename":"BadgesProfileLevelType"},"__typename":"UserType"},"latestContestResult":null,"__typename":"PrintType"},{"id":"17772","name":"D12 Figurine Case","slug":"d12-figurine-case","ratingAvg":"0E-10","likesCount":1,"liked":null,"datePublished":"2020-03-21T07:29:19.637631+00:00","dateFeatured":null,"firstPublish":"2020-03-21T07:29:19.637631+00:00","downloadCount":21,"mmu":false,"category":{"id":"31","path":[{"id":"30","name":"Toys & Games","nameEn":"Toys & Games","__typename":"CategoryType"},{"id":"31","name":"Board Games","nameEn":"Board Games","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2022-04-12T14:24:28.996508+00:00","image":{"id":"84539","filePath":"media/prints/17772/images/170282_0149695a-fc72-42b8-a249-b7cdb7215f1a/img_3604_17772.jpeg","rotation":0,"imageHash":"28YFRYqvTaamiGiKVmmnePuEvE/I","imageWidth":4032,"imageHeight":3024,"__typename":"PrintImageType"},"nsfw":false,"club":false,"price":null,"user":{"id":"44179","handle":"Penwiggle_44179","verified":false,"dateVerified":null,"publicUsername":"Penwiggle","avatarFilePath":"","badgesProfileLevel":{"profileLevel":3,"__typename":"BadgesProfileLevelType"},"__typename":"UserType"},"latestContestResult":null,"__typename":"PrintType"}],"featured":false,"__typename":"HighlightedModelsType"},"designer":false,"stripeAccountActive":null,"membership":null},"contests":[{"id":"377","name":"Dice Storage","slug":"dice-storage","description":"Dungeons & Dragons has soared to new popularity, gone are the days of the game only being played by outcasts and now major movie stars stream their campaigns. You can't play a good game of D&D though without a good set of dice and when you find your lucky set you need to protect them. This week we are excited to see your takes on items to store your dice. This is a great opportunity to really go beyond basic boxes and embellish your carrier like your best dungeon master embellished the story of your favorite campaign. All entries should be able to carry multiple dice securely and should preferably accommodate dice with different numbers of sides.","isOpen":false,"__typename":"CompetitionType"}],"contestsResults":[],"prusameterPoints":null,"latestContestResult":null}}}

D20 Puzzle Di Holder MarkII

Makes Add make

Comments

Makes