This planter is designed with the intention of creating a visually attractive design that is also easy to print. The pictured print was done using a 0.6mm nozzle and 0.2mm layer height to save printing time, but it could easily be done with a 0.4mm or other nozzle.
By default, the model is 4" tall and wide, with a 3.625" inner diameter, although scaling it up or down shouldn't cause any issues. It also includes drainage holes at the bottom, and the drainage tray.
If you like this design, consider leaving a tip! I'm a university student that designs planters on the side, so anything helps!
The author marked this model as their own original creation.