Heart lithophane lamp usb

 Link to the led used inside:

https://pl.aliexpress.com/item/1005003682773819.html?spm=a2g0o.productlist.main.3.5edd6694zRZPqy&algo_pvid=92c4a810-9cc4-435b-aed0-28d9dcb73716&algo_exp_id=92c4a810-9cc4-435b-aed0-28d9dcb73716-1&pdp_ext_f=%7B%22sku_id%22%3A%2212000026803486436%22%7D&pdp_npi=3%40dis%21PLN%2148.39%2124.2%21%21%21%21%21%402100b69816769073381177521d06d2%2112000026803486436%21sea%21PL%210&curPageLogUid=l01wOmDL0CNU

The PLA used is ORANGE FLUO.

Photo settings: 45mm/s, 99% fill, 7mm brim and supports,Layer height: 0,1mm.

Print speed: 60mm/s
Temp bed: 65°C
Temp nozzle: 220°C
Layer height: 0,2mm
The settings are also dependent on the PLA you are using. The printing time of the lamp is about 13 hours, and the printing time of the plug and screw is about 40 minutes.