Heart lithophane lamp

The dimensions of the lamp are 150 mm high, 150 mm wide, 65 mm deep. Link to the lamp used inside:

https://pl.aliexpress.com/item/1005004478173922.html?spm=a2g0o.productlist.main.69.3ba17d76ERxjpD&algo_pvid=9d22aafa-b89d-4cd1-a537-ed5d9763ee93&aem_p4p_detail=202302130729554647100251722610000867005&algo_exp_id=9d22aafa-b89d-4cd1-a537-ed5d9763ee93-34&pdp_ext_f=%7B%22sku_id%22%3A%2212000029303028283%22%7D&pdp_npi=3%40dis%21PLN%2116.31%219.15%21%21%21%21%21%402145274c16763021955152604d06ca%2112000029303028283%21sea%21PL%211797703880&curPageLogUid=u4PVwsPgsnDY&ad_pvid=202302130729554647100251722610000867005_7&ad_pvid=202302130729554647100251722610000867005_7

The PLA used is ORANGE FLUO.

Photo settings: 45mm/s, 99% fill, 7mm brim and supports,Layer height: 0,1mm.

Print speed: 60mm/s
Temp bed: 65°C
Temp nozzle: 220°C
Layer height: 0,2mm
The settings are also dependent on the PLA you are using. The printing time of the lamp is about 13 hours, and the printing time of the plug and screw is about 40 minutes.

https://youtu.be/IMMqWizAKYE