Stem for 5cm Spiral Vase Rose

Stem for 5cm Spiral Vase Rose with bottom by lytta.

It has three different parts: “Leaves”, “Receptacle”, and “Stem”.

Printing

I printed all of the parts with 3 walls, 3 tops and 3 bottoms using lightning infill.

I used a heat gun (a hair dryer would have worked) to heat up the “Leaves” model and then bent the leaves down.

I glued the leaves to the “Receptacle” and then glued the “Spiral Vase Rose” to that. Last, I inserted the “Stem” into the Receptacle.