Heated Power Cable Guide for Prusa Mini

I had to shave off a bit from the bumps to get it to fit but it stays and works well.

Tiny, but effective item. Recommended to use when installing the Mini in an Enclosure

A simple hack to prevent print failures, a must have for every Prusa MINI owner.
Also works great if you have the Original Prusa MINI Enclosure.

Tough for the photo. But it holds well.

I had the same recurring issue. Hope this helps. Thank you for solving it for me!

Top!

Works really well! Thank you!

Thanks a lot ! :-)
My life will be easier now

The most elegant solution to a design weakness of the MINI. I have 20 MINIs that are running almost 24/7 and I can say that this is a real design problem on the MINI. Even if it doesn't kill the print it will leave ridges on your parts, and this is the simplest and easiest way I've found (short of a piece of wire) to fix the issue. Bravo.

Model działa. Przyklejony super klejem.