PSVR2 - Controller stand

Stand to hold the controllers upright with guide channel for the USB-C cables set into the base. Ideally this would work even better with magnetic USB-C connectors on the std. Sony cables etc. which I'll probably add.

I've made two versions. One rectangular & the other circular/spherical for individual preference. The circular is wider so more stable with one controller vs the rectangular which will tip with just the single inserted - looks a bit like a rams head with the controllers…

My cupboard is fairly small and this footprint is a little less than Sony's charger… cheaper too. Plus not fond of the sit on charging type, quite easy to bump off in my experience.